Handheld Laser Welding Machine (Cleaning Machine)

Thank you for choosing ARLLASER handheld fiber laser equipment. After receiving the handheld laser welding machine or cleaning machine, please check that the outer packaging is intact. Once the machine arrives, please contact us immediately to arrange technical support and commissioning.

1. Precautions Upon Product Arrival

1) Keep at least 20 cm of ventilation space at the front and rear of the equipment.

2) Do not place flammable or explosive items near the equipment.

3) Before use, fill the machine with purified water or distilled water (add antifreeze in winter!). It is strictly forbidden to power on or operate the machine without coolant.

4) Be sure to connect to an air circuit breaker. Do not use extension cords or power strips.

5) During testing and operation, shielding gas must be turned on. It is forbidden to operate without shielding gas.

6) For welding, prepare welding wire that matches the workpiece. For aluminum, aluminum-magnesium alloy wire ER5356 is recommended.

7) When operating or moving the equipment, handle the laser head carefully to prevent dust from entering and causing contamination.

8) Wear protective goggles and a mask during operation and ensure proper safety protection.

9) The temperature difference between the chiller water and the ambient temperature must not exceed 10°C. In summer, keep the water temperature at 26–30°C; in winter, 20–22°C. Excessive temperature differences in the cabinet may cause condensation on laser components, resulting in laser damage.

10) Antifreeze must be used when the ambient temperature is below 4°C.